DEGATECH IPC CONTROLLER – IN PROCESS CONTROL SEQUENTIAL TIMER
General working of Dust Collector Controller or sequential controller is, to sprinkle air on baffle plate. When sequential controller sprinkle air, the dust that resides on baffle plate, while the Dust Collection is in process, is again collected in the filter bag. The dust is collected by using Dust Collector Controller is in timely manner as required by the operator.

The pilot diaphragm valves used on dust collector system is operated using sequential controller. The series of sequenced steps is available in different channel options, which is customizable from 2 through 16 ports. To adjust the length of time between valves being de-energized (Off time / Pulse Frequency) and the length of time that the valve is energized ( On time / Pulse Duration) controls are provided. All logic functions and timings are controlled by Silicon semiconductor components.

DEGATECH DELTA P CONTROLLER – DIFFERENTIAL PRESSURE BASED CLEANING

DeGATECH DELTA P Cleaning pauses until the differential pressure reaches the high range once more and the system will automatically pulse down again. DeGATECH provides visual indication of filter differential pressure and adjustable high and low cleaning control set points and high level alarm. Filter cleaning begins when filter restriction reaches the high set point and continue until the lower set point is reached. This “on-demand” logic is used to reduce compressed air usage and to improve filter life and efficiency. The series of sequenced steps is available in different channel options, which is customizable from 2 through to 16 ports. To adjust the length of time between valves being de-energized (Off time / Pulse Frequency) and the length of time that the valve is energized ( On time / Pulse Duration) controls are provided.